Cookies helfen uns unserer Onlinedienste zu verbessen. Durch die Nutzung unserer Website erklären Sie sich damit einverstanden, dass wir Cookies nutzen. Mehr erfahren

SMARC™ 2.0 Carrier Board
  • 170 x 170 mm
  • 2 W
  • 0 - 70 °C



The new SMARC™ 2.0 embedded platform MSC SM2-MB-EP1 offers a variety of interfaces commonly used in embedded applications such as Gigabit Ethernet, SATA, USB 3.0, USB 2.0 Host, USB 2.0 Client, RS232, CAN, SPI, I2C as well as LVDS/eDP, DisplayPort and DVI display interface and regulated backlight supply.

In addition a PCI Express x4 slot, a mini PCI Express slot and one SD Card socket are supported to extend the functionality of the carrier board. To complete the feature set HD or I2S Audio and a MIPI CSI-2 camera interface are offered.

The SMARC™ module slot of the EP1 platform is placed on the top side of the carrier board, which comes in the Mini-ITX form factor allowing easy integration into standard Mini-ITX enclosures.
  • Highlights
  • Specs
  • Order Info
  • Documents

SMARC™ 2.0 carrier board for full size and short size modules

DVI/HDMI and DisplayPort connectors

LVDS and eDP connectors

Regulated backlight supply

Two Gigabit Ethernet ports

PCI Express x4 slot

Mini PCI Express Card slot

One SATA connector

Two USB 3.0 host ports

Two USB 2.0 host ports

One USB 2.0 OTG port

RS232 on DB9 connector

CAN on DB9 connector

SPI, eSPI, SMBus, I2C and GPIO

HD or I2S audio interface

MIPI CSI-2 camera interface

SD Card socket

Fan connector

CMOS battery

ATX Power Connector or single 12V/24V power jack

Mini-ITX Form Factor (170 x 170 mm)

Technical Data - MSC SM2-MB-EP1

Show all
Collapse all





SD Card Socket

Storage Interfaces

1x SATA-II (3Gbps) connector, separate floppy type power connector


2x USB 3.0 host port

2x USB 2.0 host port

1x USB 2.0 OTG port (MicroUSB)

1x USB 2.0 on Mini PCI Express slot

Serial Interfaces

1x RS232 (UART0) on DB9 connector with 2-wire hand shake

1x RS232 (UART1) on pin header w/o hand shake

Bus Interfaces

PCI Express lanes from module can be connect to either

1x PCI Express x4 Gen.2 slot or

1x Mini PCI Express x1 Card slot


1x CAN 2.0B on DB9 connector

1x CAN 2.0B on pin header


1x eSPI connector


SPI, SMBus, I2C, and GPIO on pin header

Display Interfaces

DisplayPort connector


DVI connector


40-pin eDP connector


LVDS on Jili30 connector with EEPROM for display data and backlight connector


MIPI CSI-2 camera interface on 15pin FFC connector

Network Interface

2x 10/100/1000BASE-T Ethernet on RJ45 connector, with two integrated status LED‘s

Audio Interface

HD or I2S Audio codec, routed to three audio jacks


4-pin fan connector, PWM controlled by module


Socket for CR2032 type RTC battery (3V)


Serial EEPROM for board data

Serial EEPROM for LVDS display data

SPI Boot Flash, socket


Power and Reset button

Configuration switches/jumper

Feature Highlights

SMARC™ 2.0 carrier board for full and short size modules


Support of listed carrier board features and interfaces depends on used module

Power Requirement

Standard 20pin ATX power connector plus additional 4pin ATX 12V connector, power jack for alternative single voltage supply (12V/24V)


Temperature Range:

0°C … +70°C operating

-20°C … +85°C storage



5 … 90% (operating, non condensing)

5 … 90% (storage, non-condensing)


170 x 170 mm



Order Reference - MSC SM2-MB-EP1

Select all:
Order No. Description Reference Status  
68488 SMARC 2.0 Embedded Platform with PCI Express x4 slot, GbE, SATA, USB 3.0, USB 2.0, USB 2.0 OTG, RS232, CAN, SPI, eSPI, SMBus, I2C and GPIO interface, LVDS/eDP, DisplayPort and DVI display interface, regulated backlight supply, HD/I2S audio interface, MIPI CSI-2 camera interface, mini PCI Express card slot, SD card slot, fan connector, CMOS battery, Mini-ITX form factor (170 x 170 mm), ATX power connector and single 12V/24V power jack, commercial temperature range 0..+70°C MSC SM2-MB-EP1-001 PCBFTX PV
Show Comparison
PV = Preferred variant; OR = on Request (in OEM quantities only)


Watch List

Show Comparison

Sales Kontakt

Contact: +49 (0)7249-910-0